Study: My Understanding of

Quick Tips to Finding Hidden Piping and Valves

It is important that you know the details of your home like the back of your hand in case you are a homeowner. One of the things that is especially critical is finding hidden water as well as gas piping and valves and it is important to know where they are especially if you have to deal with things like an emergency. There are various ways that you can be able to do that and some of the ways that you can be able to ensure that you do that are briefly highlighted below.

In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. For the most part, most of the nubs are usually rectangular in shape and are opened using a wrench but most gas companies usually recommend that you do not touch them. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.

If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. Having such a piping usually means that you have a high-pressure gas system for your home. Such gas systems usually have the shutoff valve near the water heater or the furnace.

When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. Cold environments usually have the shut off points located in the house so that they do not freeze. The shut off valve is most likely to be located in an underground box or lid next to exterior wall if you live in milder climates.

Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.

With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. By using a metal detector, you are sure that you will be able to find such valves since they are usually made up of metals. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.

You may also like...